盛鴻材料科技 Victory Own Technology Co-散熱,導熱,導電處理專家-導熱材料,導熱相變化材料,導熱矽膠片,導熱膠,導熱膠帶,石墨片,導熱硅膠,散熱片,EMI

‧ Ultra-thin heat
spreaders

└ C-cooler

‧ Thermal Interface
Materials

├ Phase change materials

└ Thermal tape

└ Gap filler &Insulator pads

└ Thermally Conductive

　Graphite Tape

‧ EMI Shielding

├ Two-sided thermal tape
│ with no base

├ Omni-directional
│ Conductive Tape

├ Copper Foil Conductive
│ Tape

│ Aluminum Foil
└ Conductive Tape

Products

Thermally Conductive Graphite Tape

GR-series & GR-E series is fills the graphite material in the acrylic fabric colloid, coating in various type parent metal applications. The heating source can be direct contact with the graphite material, rather than the adhesive on general graphite will
cause denial, therefore it can be thermal conductivity of non-conductive, and thermal conductivity and electrical conductivity.
In accordance to the mobile devices is very thin now, the heat source is unable to disperse, the heat source must to lateral conduction, and the GR series material obtained the general applications.

Feature:

Superior thermal performance、 low resistance, and can be insulated or conductive.
X-Y-axis lateral thermal conductivity.
The high conductivity GR-E series can achieve very low resistance value.
Graphite material conforms readily to surface imperfections, no need to using any fasteners or screws.
Non-friable.
Can be used with insulating Mylar to reach insulation and the characteristics of adhesive one side.
Can be coating single-sided or double-sided according to the needs.
Enhanced thermal conductivity between the heating element and the heat sink.

Applications:

Mobile devices: cell phone or Tablet Personal Computer.
Applies to all types of networking and communications products. Ex: base station、router 、and hub modem system.
LED backlight and lighting.
All kinds of consumer products. Ex: TV、Set Top Box.
All kinds of electronics, electrical products heating application.

VK-SERIES

Good thermal conductivity thermal gap pad.
Meet any scope to use.
Fully corresponding the grade of imported product, well worth it's value and easy-to-use.
The thickness and adhesive can be ordered.
More special high K value material.

TYPICAL PROPERTIES
No.	GR-8	GR-13	GR-5S	GR-8S	Test Method
Construction& Composition	Graphite filled acrylic pressure-sensitive adhesive				--
Color	Metallic Black				Visual
Thickness	0.085 mm	0.135 mm	0.055 mm	0.085 mm	ASTM D374
Thickness tolerance	±10%				--
Thermal Conductivity (W/mK)	2.8		3.6		ASTM D5470
Thermal Conductivity (W/mK) X-Y Plane	140		180		ASTM D5470
Peel Strength 90º on aluminum	1550 g	1800 g	1000 g	1200 g	ASTM D1000
Holding Power 1Kg@Room Temp using 1 in²	1 Week PASS				PSTC-107
Holding Power 500g @ 70°C using 1 in²	1 Week PASS				PSTC-107
Continuous Use Temp	﹣30℃ to 150℃				--

TYPICAL PROPERTIES
No.	GR-6E	GR-12E	GR-3ES	GR-7ES	Test Method
Construction& Composition	Graphite filled acrylic pressure-sensitive adhesive				--
Color	Metallic Black				Visual
Thickness	0.058 mm	0.125 mm	0.038 mm	0.075 mm	ASTM D374
Thickness tolerance	±10%				--
Thermal Conductivity (W/mK)	4.0		4.8		ASTM D5470
Thermal Conductivity (W/mK) X-Y Plane	140		180		ASTM D5470
Peel Strength 90º on aluminum	1200 g	1800 g	1000 g	1400 g	ASTM D1000
Holding Power 1Kg@Room Temp using 1 in²	1 Week PASS				PSTC-107
Holding Power 500g @ 70°C using 1 in²	1 Week PASS				PSTC-107
Continuous Use Temp	- 30℃ to 150℃				--
Electrical Resistance	<0.05 ohms/in2				ASTM D257